Description
TECHNICAL INFORMATION
Comes with Vision X Harness kit
Connection: Dutch plug
Power source: 9-32 Volts
Housing: Aluminium
Glass: Polycarbonate
Specifications:
Consumption: 10A at 12V
Power: 12x10W 120W LED
Dimensions: 70x80x610mm (height/depth/width – dimensions are without bracket)
Optic setup: 70°/45°/25°/15°/6.5°/6.5°/15°/25°/45°/70°
Weight: 2.46 kg
Lux number / Reference number: 30%
Lumen: Raw 12,948lm / Effective 9,064lm
5.5 YEAR WARRANTY
Complaint conditions
Before you advertise the product, we ask you to troubleshoot it as follows:
- Check the product with external power. The check is carried out as follows: start by checking the lamp’s volt number, which you can find on the lamp’s cord (12V or 24V or multivolt). Make sure that the incoming voltage corresponds to the lamp’s voltage (Volts). ATTENTION! it must not be exceeded. Connect the lamp to the power source via a 40A fuse. Check the function of the lamp.
- Check that the cable is not cut or damaged.
- Check that the lens is intact, e.g. not cracked.
- Check that the warranty period has not expired.
- In case of corrosion on some products, new parts are sent out. Please contact your salesperson.
Vision X has a 5.5-year functional guarantee and a 2-year surface condition guarantee on most LED lights. Function guarantee means that if one or more diodes go out within *5.5 years from the date of purchase, the product will be repaired or replaced. 5.5 years corresponds to approx. 50,000 burning hours. This applies to lighting with purchase date e.g. 2015-01-01. The two-year surface warranty covers color fading.
*The VL series is covered by a 2-year functional guarantee.
Costs for packaging, any troubleshooting costs, installation and disassembly costs are paid by the buyer. The product must be professionally assembled for the warranty to apply. Vision X Europe is responsible for faults that occur upon delivery or that arise during the warranty period, but not if the complaint is likely to be due to:
- The advertised product was not handled according to instructions.
- The advertised product has not been handled professionally.
- The advertised product has not been used for its intended purpose.
- The product has been rebuilt or changed.
- The product has been exposed to traffic accidents or other external influences.
- The product has been damaged.
- Repair and assembly carried out incorrectly.
- Normal wear and tear, e.g. rips, etc., is not considered a fault.
- The cable or connector has been damaged or cut / changed.
Vision X Europe is not responsible for consequential damages; for example lost profit, working time or loss of use.
Transport damage must be reported immediately to the carrier, not to Vision X Europe.
